The John Deere 500 Style attachment carrier allows one person to quickly change attachments without the use of tools.

Changing from bucket to pallet fork or bale spear takes only seconds to allow for increased productivity.

Simply remove the retaining pin on each side of carrier, back away from first implement, connect to second and reinstall clip pins.

No tools needed nor heavy pins to pull.

Retaining pin

Detail of indicated area with pin in storage area

With the bucket level or slightly rolled back, simply remove the retaining pins and place in storage position.

Roll the attachment forward to disengage pins

Roll the attachment forward to disengage the lower pins.

Lower attachment to ground-disengage top hooks

Lower the attachment to the ground to disengage the top hooks.

Back away from attachment

Back away.

To install another attachment simply reverse these steps.

500E Loader