Z370R and Z380R display panel and controls

Z370R and Z380R display panel and controls

Z370RS display panel and controls

The Z300R Electric ZTrak™ is designed to be intuitive to use, with controls at your fingertips.

Get started with the power button

Power button

Removing key pin from power button

A simple hold of the power button activates a Z300R Electric ZTrak. A key pin can be removed to prevent unintended access.

Two easy-to-see displays keep you informed

Z370RS Display panel

Status display

Display panel

Located on the console near power button and mower controls
Shows your battery level, operating mode, and operating hours
- Z370RS display includes battery status indicators for each of the six batteries which displays the quantity of batteries in use, and if there is a problem with a specific battery
Advises if an unsatisfied PTO, seat, or motion-control interlock is preventing operation
Advises when the mower is in push mode or when park brake is applied
Back lit for night visibility

Status display

Built into footrest to increase visibility while mowing
Displays battery level in five vertical segments
Indicates mower status in top horizontal segment
- Green-you’re ready to turn on PTO and start mowing
- White-you’re in standby, you need to satisfy a PTO, seat, or motion-control interlock
- Red-there is a mower fault that needs to be corrected by cycling the PTO switch, cycling the power button, or dealer service

You’re in control

Z370R Electric ZTrak mowing

Mode and PTO switch

The electric transaxle of the Z300R Electric ZTrak is tuned to be smooth, responsive, and operate like a gas-powered ZTrak Mower.

Three operating modes enable you to tailor the performance to your preferences and yard conditions:

Low mode - 5-mph (8-km/h) travel speed for trimming or precise maneuvering
High mode - Full 7-mph (11.3-km/h) travel speed for most mowing situations
Bagging mode - Increased mower-blade speeds to support material collection* or challenging mowing conditions

Operating mode can be changed using the mode switch

Material collection is only available on the Z370RS and Z370R with the 42-in. (107-cm) mower deck.

Automatic park brake

Motion-control levers in park position

Motion-control levers in operating position

Motion-control levers in operating position

The integrated park brake is automatically applied when motion control levers are stowed outward and disengaged when levers are placed into operating position.

Mow at the right height every time

Cut-height adjustment knob

Foot-pedal lift

A foot-lift pedal and a cut-height preset work together to set the cut height and ensure the mower deck returns to the correct position:

Easily lift the mower deck using the foot-lift pedal
Use the cut-height adjustment knob to set your desired cutting height
Release the lift pedal to lower the mower deck to the preset cut height
Mower deck cutting height adjusts from 1.25 to 4.5 in. (3 to 11 cm) in 0.25-in. (0.64-cm) increments

The foot-lift pedal also provides a convenient way to temporarily raise the mower deck over an obstruction while mowing.

Z380R Electric ZTrak&trade; Mower

Z380R Electric ZTrak™ Mower